Advertisement
Quick Links
Advertisement
Related Manuals for Printek FormsPro4300
Summary of Contents for Printek FormsPro4300
- Page 1 guide Set-Up Guide FormsPro 4300 4500 4300 4503 4500 Printers 4503 ®...
-
Page 2: Read Me First
READ ME FIRST Before You Setup Printer... Setup of your Printek FormsPro Series printer is quick and ® easy. By following this guide, you will be able to set parameters for up to ten unique form configurations and for successful printer/computer communication. -
Page 3: Forms Setup
FORMS Defines Each Form’s Configuration Functions Possible Values Description Form #: 0 through 9 Allows you to select the desired form to be configured. Printer defaults to the currently selected form. F# Path: Front, Center, or Rear Assigns tractor path to be used for current form ( Available on FormsPro 4503 only ). - Page 4 Selects current emulation mode, barbermode, or Epson*, Bar Codes, hex dump mode (Test mode for factory use only) . Proprinter, LA-120, TTY, Printek, Barberpole, or Hex Dump I/O: Parallel*, Serial, CX/TX or Selects active I/O port. If CX/TX interface is IPDS (CX/TX &...
- Page 5 OPTIONS Configures Options Functions Possible Values Description Max Form #: 0 through 9 Sets the last form number to be displayed by operator selection with FORM SELECT button or while in “Setup: FORMS” menu. Ribbon Check: On* or Off Sets whether ribbon checking is active. Turning off may limit the warranty on print head.
- Page 6 Printek, Inc. 1517 Townline Road Benton Harbor, MI 49022-9697 For technical assistance: 1.800.368.4636 (choose customer service at menu) 616.925.8539 (Fax) Copyright © 1997, Printek, Inc. All rights reserved. Printek and the Printek logo are trademarks of Printek, Inc. Printed in U.S.A.
Need help?
Do you have a question about the FormsPro4300 and is the answer not in the manual?
Questions and answers