Ip Address Administration (Ip Get M); Banner Page (Banner) - Printek FP5000 series User Manual

User guide
IP address administration
(IP Get M)
Subnet IP Get M
Back Next
1 2 3 4
IP Get M=DHCP
Set < > Exit
1 2 3 4

Banner page (Banner)

Banner=No
Set < > Exit
1 2 3 4
Selects the way of administrating the IP address.
Press IP Get M (3) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
*
Setting Options: Static, DHCP, BOOTP
Online
Default Setting: DHCP
Setup
Confirm the setting by pressing the Set key (1).
The setting Static is the precondition that the values entered in
the parameter IP Addr become valid (see
Addr)
Press the Next key (4) to access the next group of parameters.
Specifies whether a banner page is to be printed out, when using the
LPD/LPR protocol.
Press Banner (2) key.
Use the < (2) or > (3) key to select the desired setting.
*
Setting Options: Yes/No
Online
Default Setting: No
Setup
Yes: When using the LPD/LPR protocol a banner page will be prin-
ted out in front of every print job, containing the file name and the
print queue name. The width of the banner page is 8".
Confirm the setting by pressing the Set key (1).
(page 73).
The Menu
Setting IP address (IP
75