Further Settings (Special); Error Handling (Errmode); Block End Character (Blockend) - Printek FP5000 series User Manual

User guide

Further Settings (Special)

Special Protocol
Back Next
1 2 3 4

Error handling (ErrMode)

ErrMode Blockend
Back Next
3
1 2 4
ErrMode=Off
Set < > Exit
1 2 3 4

Block end character (Blockend)

ErrMode Blockend
Back Next
1 2 3 4
Blockend=Off
Set < > Exit
1 2 3 4
This parameter subgroup only appears if the serial port is used and
the ENQ/STX, ETX/ACK or ACK/NAK protocol is activated.
Press Special (2) key.
Online
Setup
On replaces the incorrect character with ?, Off deletes the entire
block.
Press ErrMode (2) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
*
Setting Options: On/Off
Online
Default Setting: Off
Setup
Confirm the setting by pressing the Set key (1).
End-of-block character definition; On: LF, FF, CR, VT, ETX, DEL;
Off: ETX, DEL.
Press Blockend (3) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
*
Setting Options: On/Off
Online
Default Setting: Off
Setup
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
The Menu
69