View And Tear Position (Autotear) - Printek FP5000 series User Manual

The Menu
View and tear position
(AutoTear)
Paper AutoTear
Back Next
1 2 3 4
ViewTear=Off
Set < > Exit
1 2 3 4
84
The auto tear function or the auto view function can be selected as
desired.
When auto view is switched on, the last printed text is visible. As
soon as data is received the paper moves to the "normal" print posi-
tion. After printing the printer waits for the given interval to bring the
paper once more to the auto view position.
The paper is in the tear off position when auto tear is switched on,
the perforation of the paper is positioned at the tear off edge of the
printer. If data is received, the paper returns to the normal print po-
sition. After printing, the printer waits for the given interval to bring
the paper once more to the tear off position. If the tear off edge does
is not aligned with the perforation of the paper then this can be cor-
rected.
Press AutoTear (3) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
*
Setting Options: ViewTear=Off,
Online
Setup
Default Setting: Tear=1s
If the parameter View Tear = Off is set, the paper can still be
brought into a View or Tear position via a specific sequence (see
page
If the parameter Tear at TOF is set, the paper perforation is auto-
matically positioned at the tear off edge as long as the current print
position TOF is activated. Feeding takes place after approx. 1.5 sec-
onds (hold time). If any data is received during this period of time the
paper is not positioned at the tear off edge. With this function it must
be noted that the printer may only be switched off when the print po-
sition is at TOF.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
View=1s/3s/6s
Tear=1s/3s/6s
Tear at TOF
153) or the Tear key.
User guide