Online Mode; Offline Mode - Printek FP5000 series User Manual

User guide

Online mode

Online Trac1
Tear
1 2 3 4

Offline mode

After switching on, the printer is automatically set to online mode.
Only in this mode can it receive data from the computer.
Tear key (4): Activates the tear function when fanfold paper is
loaded, see
Online
If Load is displayed above this key, no paper is loaded in the
printer or the printer is in park position. In this case the display
Setup
switches between Online and Load paper fromTrac1. Press the
key to feed paper to the printing position.
Setup key: Sets the printer to setup mode.
Online key: Sets the printer to offline mode.
Only in this mode is it possible to perform step, line, or form feeds
from the control panel, see
data cannot be received.
Park key (1): Clears the paper path with paper loaded and acti-
vates paper path quick selection.
Key
Continuous paper feed.
Key
Continuous paper reverse feed up to the park position.
Load key (4): Displays that no paper is loaded in the printer or the
printer is in park position. In this case the display switches be-
tween Online and Load paper fromTrac1.
If paper is loaded: Loads paper from the selected paper source;
the display changes to LF/FF
Short keypress: Line Feed (LF).
Long keypress: Form Feed (FF).
Setup key: Sets the printer to setup mode.
Online key: Sets the printer to online mode.
Moving the paper to the tear position (page
Paper transport (page
(2): Short keypress: Microstep forward. Long keypress:
(3): Short keypress: Microstep reverse. Long keypress:
The control panel
43).
42); however,
33