Hyundai HYC2610 User Manual page 3

 Vibration.
deviate from the manual or the manufacturer specified. This can be caused by the following factors,
before or during each of use the following points should be considered:
o Is the machine being used correctly?
o Is the method of cutting and processing the material correct?
o Is the machine being used within the relevant regulations?
o Sharpness and condition of the cutting tool.
o The grab handles are mounted back to optional vibration handles and are they fixed to the
machine body.
o If you notice an unpleasant sensation or skin discoloration during use of the machine on
your hands once you stop working. Place an adequate work breaks. In disregard of adequate
work breaks, there may be a hand-arm vibration syndrome.
: The actual existing vibration emission value during use of the machine can
This top-handle chainsaw is of a
type especially designed for tree service.
competent trained operators.
The minimum standard of competence is set out in
the Approved Code of Practice - PUWER98
It is only to be used by
Page 3
6
Rev 3