Installing Guide Bar And Chain - Hyundai HYC2610 User Manual

4. INSTALLING GUIDE BAR AND CHAIN

4.1. A standard saw unit package contains the items listed below;
1 Power Unit
2 Saw Chain
3 Guide Bar
4 Guide Bar Cover
5 Spark Plug Socket
6 File
4.1.1. Pull the guard towards the front handle to check that the chain brake is not on.
4.1.2. Loosen a nut and remove the chain cover. Fix the spiked bumper with two screws on the
forefront of the chain saw (Figure 1).
The Spiked bumper belongs to the chain saw. It must be screwed up on chain saw
before the initial use
1 Nut
2 Clutch Cover
3 Spiked Bumper
4 Tapping Screws
The saw chain has very sharp edges. Use protective gloves for
safety.
Page 12 Rev 3