STEP #7.
Attach the (left) handlebar (69) and (right)
handlebar (70) to the top of the
corresponding swivel tube. Secure the
attached members using the screws (18)
supplied, as shown in Illustration #7.
STEP #8.
Pull the pulse sensor cable up to the console mount
using the pull wire, which is secured to the top of the
Upright Tube (65). Mount the Fixed Handlebar (68)
to the mounting bracket using the hex head bolts (6)
supplied. Enclose the mounting holes and bolts by
interlocking the Upper cover (84A) and lower
cover (84B),securing them both using the screw
(59) provided, as shown in Illustration #8.
ASSEMBLY INSTRUCTIONS
70
18
Illustration #7
8
69
PULL
65
59
WIRE
84A
6
84B
PULSE SENSOR CABLES
Illustration #8
68