Installing The Grass Basket - Toro 04042 Operator's Manual

3. Rotate the wheel back and forth until it slides
completely onto the axle and the locking clip is secured
in the groove on the axle shaft.
4. Repeat the procedure on the opposite side of the
machine.
5. Inflate the tires to 83-103 kPa (12-15 psi).
6. Carefully lower the machine off of the kickstand.
8

Installing the Grass Basket

Parts needed for this procedure:
1 Grass basket
Procedure
1. Grasp the basket by the handle
1
1. Basket hooks
2. Guide the basket lip between the cutting unit side
plates and over the front roller
3. Install the basket hooks over the frame loop
19).
Important: If you ever drop the basket, examine the
pitch arm contact points near the lower lip of the basket
for damage (Figure 20). Straighten them before using
the basket. Using the basket with bent pitch arm contact
points could damage the reel.
(Figure 19).
G017245
Figure 19
(Figure 19).
g024292
1. Pitch arm contact point
(Figure
17
Figure 20
1