Installing The Grass Basket; Mounting The Battery Charger On A Wall - Toro Greensmaster e1021 Operator's Manual

3

Installing the Grass Basket

Parts needed for this procedure:
1 Grass basket
Procedure
Grasp the basket by the top lip and slide it onto the
basket mounting rods
1. Grass basket
(Figure 9).
Figure 9
2. Basket mounting rod
4
Mounting the Battery
Charger on a Wall
Optional
No Parts Required
Procedure
You can mount the charger on a wall using the
wall-mount key holes cut into the back of the unit. Use
screws that have a 6 mm (1/4 inch) diameter shaft
and a head diameter of 11 mm (0.45 inch).
Important:
Survey your work area and determine
a location that best meets the criteria for safe and
effective operation of the charger.
g343519
9