Product Overview; Controls - Toro 04042 Operator's Manual

Product Overview

2
3
1
4
9
8
7
Figure 21
1. Operator-presence control
2. Traction and reel drive
engagement lever
3. Handle
4. Service brake
5. Battery pack
5
6
G017155
6. Grass basket
7. Cutting unit
8. Transport wheels
9. Electric motor

Controls

5
4
3
G017156
2
1
1. EZ-Turn switch
2. Open space for optional
lights
3. Parking-brake latch
4. Service brake
5. Operator-presence control
EZ-Turn Switch
The EZ-turn switch (Figure
EZ-Turn feature. EZ-Turn is a feature that automatically
slows the machine whenever you raise the cutting unit off the
ground during mowing. This allows you to make the turns at
the end of each mowing pass at a slower speed. You can use
the switch at any time, even while mowing.
This feature only reduces the ground speed when the reel is
engaged and lifted off the ground. It has no effect on ground
speed when the reel is disengaged. If this feature is activated
while mowing and you turn off the reel, the machine will
speed up. If you are mowing at a slow speed already, the
EZ-Turn feature will not slow the machine on a turn.
Service Brake
The service brake (Figure
of the handle. Pulling the lever back will apply the service
brake. If you operate the machine with the brake on, it will
move, but with high resistance and power consumption will
increase.
18
6
7
8
9
Figure 22
6. Handle
7. InfoCenter LCD display
8. Key switch
9. Speed control
22) enables or disables the
23) is located on the left front side