Checking Fluid Levels; Installing The Grass Basket - Toro 04019 Operator's Manual

Figure 13
1. Kick stand
2. Press wheel locking clip toward the center of wheel
and slide wheel onto hex shaft (Figure 14).
Figure 14
1. Locking clip
3. Rotate wheel back and forth until it slides completely
onto axle and locking clip is secured in groove on
axle shaft.
4. Repeat procedure on opposite side of machine.
5. Inflate the tires to 12-15 psi.
6. Carefully lift up on handle support to release kick
stand.
6

Checking Fluid Levels

No Parts Required
Procedure
1. Check the engine oil level, refer to Checking the
Engine Oil Level.
2. Check the transmission fluid level, refer to Checking
the Transmission Fluid Level.
7

Installing the Grass Basket

Parts needed for this procedure:
1 Grass basket
Procedure
Grasp basket by top lip and slide basket frame into the
receivers (Figure 15).
1. Grass basket
13
Figure 15
2. Basket receivers