Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
Media and Additional Parts
Description
Operator's Manual
Parts Manual
Operator Training Material
Note: Determine the left and right side of the machine from
the normal operating position.
1
Checking the Fluid Levels
No Parts Required
Procedure
1. Check the engine oil level before and after the engine
is first started; refer to Checking the Engine-oil Level
(page 17).
2. Check the transaxle/hydraulic fluid level before
the engine is first started; refer to Checking the
Transaxle/Hydraulic Fluid Level (page 19).
3. Check the brake fluid level before the engine is first
started; refer to Checking the Brake Fluid (page 21).
Description
No parts required
Qty.
–
Qty.
1
Read the manual before operating the vehicle.
1
Use the manual to reference the part numbers.
1
View the manual before operating themachine.
13
Use
Check the fluid levels
Use