Toro 07379 Operator's Manual page 29

Industrial utility vehicle with bed
Hide thumbs Also See for 07379:
Table of Contents

Advertisement

Maintenance Service
Interval
Every 800 hours
Every 1,000 hours
Note: Determine the left and right sides of the machine from the normal operating position.
DANGER
Only qualified and authorized personnel shall be permitted to maintain, repair, adjust, or inspect the
vehicle.
Avoid fire hazards and have fire protection equipment present in the work area. Do not use an open flame
to check level or leakage of fuel, battery electrolyte, or coolant. Do not use open pans of fuel or flammable
cleaning fluids for cleaning parts.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Maintenance Procedure
• Change the front differential oil.
• Change the hydraulic fluid and clean the strainer.
• Replace the hydraulic filter.
• Change the high flow hydraulic oil and filter (if so equipped).
• Change the brake fluid.
• Drain/flush the fuel tank.
• Flush/replace the coolant system fluid.
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workman hdx-d

Table of Contents