Electrical System Maintenance; Fuses - Toro 07379 Operator's Manual

Industrial utility vehicle with bed
Hide thumbs Also See for 07379:
Table of Contents

Advertisement

4. Lubricate the gasket on the filter canister with clean oil.
5. Install the filter canister by hand until the gasket
contacts mounting surface, then rotate it an additional
1/2 turn.
6. Tighten the drain plug on the bottom of the filter
canister.
Electrical System
Maintenance

Fuses

The fuses for the machine's electrical system are located
under the center of the dash panel (Figure 39 & Figure 40).
1. Fuses
37
Figure 39
Figure 40

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workman hdx-d

Table of Contents