Setup - Toro Workman 07390H Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
Media and Additional Parts
Description
Operator's Manual
Operator Training Material
CVT Kit 121-9853
CVT Adapter 127-8750
Note:
Determine the left and right side of the machine from the normal operating position.
Description
Steering wheel
Cover
Washer (5/8 inch)
No parts required
No parts required
ROPS frame
Flange-head bolt (1/2 x 1-1/4 inches)
No parts required
No parts required
Qty.
1
1
1
–
–
1
6
–
–
Qty.
1 Read before operating the machine.
1 View before operating the machine.
1 Connect the CVT Intake Duct (TC and H Models Only)
1 Connect the CVT Intake Duct (TC and H Models Only)
10
Use
Install the steering wheel (TC and H
models only).
Connect the battery (TC and H models
only).
Check the fluid levels and tire pressure.
Mount the Rollover Protection System
(ROPS).
Connect the continuously-variable
transmission intake duct.
Burnish the brakes.
Use