BODY/FRAME
Engine Area
Check engine area for any damage and
leaks. Ensure all hose clamps are properly
secured and no hose is cracked, kinked or
damaged otherwise. Inspect muffler, battery
and reservoir fastening devices. Check elec-
trical connections for corrosion and tightness.
Replace or have damaged parts repaired.
Skid Plate
Check tightness of fasteners and condition of
plate for cracks or other damage. Properly re-
tighten fasteners as necessary and have skid
plate replaced if damaged.
Front Fenders
Check tightness of fasteners and condition of
front fender for cracks or other damage. Prop-
erly retighten fasteners if necessary and have
front fender replaced if damaged.
WARNING
Never remove the front fenders. The im-
portant labels are applied on the front
fenders. Operating without front fender, in-
creases your chances of severe injury in
the event of an accident.
While reading this Operator's Guide, remember that:
Indicates a potential hazard that, if not avoided, could result in serious injury or death.
Fasteners
Check fastener condition and tightness on the
vehicle. Retighten if required.
Seat Latch
Remove seat and check latch mechanism
a n d p in fo r w e a r. S e e a n a u th o ri z ed
Bombardier ATV dealer for parts replacement
if damaged.
Frame
Check frame for cracks or other damage. See
an authorized Bombardier ATV dealer for re-
place or repair.
Vehicle Cleaning and Protection
Painted parts which are damaged should be
properly repainted to prevent rust.
When required, wash the body with hot water
and soap (only use mild detergent). Apply
non-abrasive wax.
CAUTION: Never clean plastic parts with
strong detergent, degreasing agent, paint
thinner, acetone, etc.
NOTE: Never use a high pressure washer to
clean the vehicle USE LOW PRESSURE
ONLY (like a garden hose). The high pressure
can cause electrical or mechanical damages.
WARNING
115