Brake; Body/Frame - BOMBARDIER outlander series Operator's Manual

See your authorized Bombardier ATV
dealer if a problem is detected con-
cerning the brake system.
Brake Fluid Replacement
WARNING
The brake fluid replacement or
any brake system repairs should
be performed by an authorized
Bombardier ATV dealer.

Body/Frame

Engine Area
Check engine area for any damage
and leaks. Ensure all hose clamps
are properly secured and no hose is
cracked, kinked or otherwise dam-
aged.
Inspect muffler, battery and reservoir
fastening devices.
Check electrical connections for corro-
sion and tightness.
Replace or have damaged parts re-
paired.
Hitch/Trailer Ball Condition
Check tightness of fasteners and tight-
ness/condition of trailer ball. Properly
retighten as necessary and replace ball
if worn.
Chassis Fasteners
Check fastener condition and tight-
ness on the vehicle. Retighten as
required.
While reading this Operator's Guide, remember that:
Indicates a potential hazar d that, if not avoided, could result in serious in-
jury or death.
Seat Fasteners
Remove seat and check latch mecha-
nism and pin for wear. See an autho-
rized Bombardier ATV dealer for parts
replacement if damaged.
Vehicle Cleaning and Protection
Never use a high pressure washer to
clean the vehicle. USE LOW PRES-
SURE ONLY (like a garden hose) .
High pressure can cause electrical or
mechanical damages.
Painted parts which are damaged
should be properly repainted to pre-
vent rust.
When required, wash the body with
hot water and soap (only use mild de-
tergent). Apply non-abrasive wax.
CAUTION:
parts with strong detergent, de-
greasing agent, paint thinner, ace-
tone, etc.
WARNING
_____________________
Never clean plastic
109