Table of Contents
Advertisement
oh
1
Flywheel Cover Removal and Installation
REMOVAL
1
Remove flywheel cover by lifting off.
INSTALLATION
2
Install the flywheel cover two front pins into the front mounting
holes and push the bottom mounting holes onto the rear pins.
Fuel System
Avoid serious injury or death from gasoline fire or explosion.
Carefully follow all fuel system service instructions. Always
stop the engine and DO NOT smoke or allow open flames or
sparks in the area while servicing any part of the fuel system.
Before servicing any part of the fuel system:
•
Stop engine and disconnect the battery.
•
Drain the fuel system completely.
•
Fuel system service must be performed in a well ventilated area.
•
Inspect any completed service work for sign of fuel leakage.
IMPORTANT: Use an approved container to collect and store
fuel. Wipe up any spillage immediately. Material used to contain
spillage must be disposed of in an approved receptacle.
FUEL LINE INSPECTION
Visually inspect the fuel line for cracks, swelling, leaks, hardness, or
other signs of deterioration or damage. If any of these conditions are
found, the fuel line must be replaced.
MAINTENANCE
WARNING
53
2
(continued on next page)
Hide quick links:
Advertisement
Table of Contents
