Tilting Operation - Mercury 300 - PRO MAX 3.0L User Manual

og
FEATURES & CONTROLS
gog62
1-3
Tilting Operation (Fleet Master & Torque Master
Gear Cases)
To tilt outboard, shut off the engine and press the trim/tilt switch or
auxiliary tilt switch to the up position. The outboard will tilt up until
the switch is released or it reaches its maximum tilt position.
1
Engage the tilt support lever (a), by pushing in and rotating knob
(b) to bring support lever upward.
2
Lower outboard to rest on the tilt support lever.
3
Disengage the tilt support lever, by raising the outboard off the
support lever and rotating the lever down. Lower the outboard.
osc1
Auxiliary Tilt Switch
4
This switch (c) can be used to tilt the outboard up or down using
the power trim system.
a
b
4
33
c
(continued on next page)