Propeller Replacement - Mercury 300 - PRO MAX 3.0L User Manual

oh
goh112
1
3

Propeller Replacement

If the propeller is rotated while the engine is in gear, there is
the possibility that the engine will crank over and start. To pre-
vent this accidental engine starting and possible serious inju-
ry caused from being struck by a rotating propeller, always
shift outboard to neutral position and remove spark plug
leads before you service the propeller.
1
Shift outboard to neutral (N) position.
2
Remove spark plug leads to prevent engine from starting.
3
Straighten the bent tabs on the propeller nut retainer.
4
Place a block of wood between gear case and propeller to hold
propeller and remove propeller nut.
5
If propeller is seized to the shaft and cannot be removed, consult
an authorized dealer.
MAINTENANCE
N
WARNING
57
2
4-5
(continued on next page)