Filling Remote Oil Tank; Filling Engine Mounted Oil Reservoir Tank - Mercury 300 - PRO MAX 3.0L User Manual

oe
goe9
1
oeo1

Filling Remote Oil Tank

1
Remove filler cap and fill with the specified oil. Oil tank capacity
is 3 gallons (11.5 liters). Replace filler cap and tighten securely.
IMPORTANT: Always make sure the oil tank caps are threaded
on tight. An air leak will prevent oil flow to the engine.
NOTE: Prior to running the engine, mark the oil level in the remote
oil supply tank for later reference. At the end of the break-in period,
visually check to see if the oil level in the remote oil supply tank has
dropped. Oil usage indicates the oil injection system is functioning
correctly.

Filling Engine Mounted Oil Reservoir Tank

NOTE: Filling this tank is only necessary if the oil level should ever
drop and the low oil warning system is activated.
2
Remove top cowl. Loosen engine mounted oil reservoir tank fill-
er cap and fill the remote oil tank with the specified oil. Run en-
gine until the oil reservoir tank is filled by the remote tank. Tight-
en the oil reservoir tank cap securely. Stop the engine and
replace the top cowl.
FUEL & OIL
24
2