Specifications - Toro 04054 Greensmaster 800 Operator's Manual

Reel Drive Lever
The reel drive lever (Figure
corner of the machine. The lever has two positions: Engage
and Disengage. Move the lever forward to engage the reel or
rearward to disengage the reel.
1
Figure 13
1. Reel drive lever
Choke Lever
The choke lever (Figure 14) is located on the left front of the
engine. The lever has two positions: Run and Choke. Move
the lever to the Choke position when starting a cold engine.
After the engine starts, move the lever to the Run position.
Figure 14
1. Choke lever
Fuel Shut-Off Valve
The fuel shut-off valve (Figure
front of the engine near the choke lever. The valve has two
positions: Closed and Open. Move the lever up to the closed
position when storing or transporting the machine. Open the
valve before starting the engine by rotating the lever down.
13) is located on the right front
G016978
g024364
1 2
2. Fuel shut-off valve
14) is located on the left
Recoil Starter
Pull the recoil starter handle
1. Recoil starter
Kickstand
The kickstand (Figure
machine and is used to raise the rear of the machine for
installation or removal of the transport wheels.

Specifications

Model 04054
Width 84 cm (33
inches)
Height 114 cm (45
inches)
Length with 122 cm (48
basket
inches)
Dry weight 97 kg (216 lb)
(with basket
and Wiehle
roller; without
wheels or
grooming
reel)
Width of cut 46 cm (18
inches)
Height of cut 1.6 mm to
31.8 mm
(0.063 to 1.25
inches)
Clip 3.3 mm (0.13
inches)
Engine speed Low idle
–1565 ±150
RPM, High
idle – 3375
±100 RPM
15
(Figure 15) to start the engine.
Figure 15
2. Kick stand
15) is mounted to the rear of the
Model 04055 Model 04056
91 cm (36 104 cm (41
inches) inches)
114 cm (45 122 cm (48
inches) inches)
122 cm (48 150 cm (59
inches) inches)
100 kg (220 105 kg (232
lb) lb)
53 cm (21 66 cm (26
inches) inches)
1.6 mm to 3.1 mm to
31.8 mm 31.7 mm
(0.063 to 1.25 (0.125 to 1.25
inches) inches)
4.3 mm (0.17 5.8 mm (0.23
inch) inch)
Low idle Low idle
–1565 ±150 –1565 ±150
RPM, High RPM, High
idle – 3375 idle – 3375
±100 RPM ±100 RPM