Fuel System Maintenance; Cleaning The Fuel Filter - Toro 04054 Greensmaster 800 Operator's Manual

2. Clean around the spark plug and remove it from the
cylinder head.
Important: Replace a cracked, fouled, or dirty
spark plug. Do not sand blast, scrape, or clean
electrodes because engine damage could result
from grit entering the cylinder.
3. Ensure that the air gap is correct
Figure 28
4. Install the correctly gapped spark plug and tighten it to
23 N-m (17 ft.-lb).
5. Install the spark plug wire on the spark plug.
(Figure 28).
G016987
25
Fuel System
Maintenance

Cleaning the Fuel Filter

Service Interval: After the first 20 hours
Every 100 hours
1. Close the fuel shut–off valve and unscrew the bowl
from the filter body
1
Figure 29
1. Bowl
2. Clean the bowl and filter in clean gasoline and install it.
(Figure 29).
2
2. Fuel shut–off valve
G016988