Servicing The Bedbar - Toro 04054 Greensmaster 800 Operator's Manual

Rollers: Standard and Optional
Part Number Description
99-6240 Narrow Wiehle
99-6241 Narrow Wiehle
88-6790 Wide Wiehle
104-2642 Full Roller
71-1550 Wiehle Roller
93-9045 Wiehle Roller
52-3590 Swaged Roller
93-9039 Narrow Wiehle
95-0930 Full Roller
Clip Kit
Part Number Description
65-9000 Clip Kit

Servicing the Bedbar

Removing the Bedbar
1. Turn the bedbar adjuster screw counterclockwise to
back the bedknife away from the reel
Figure 55
1. Bedbar adjusting screw
2. Spring tension nut
2. Back out the spring tension nut until the washer is no
longer tensioned against the bedbar
3. On each side of the machine loosen the jam nut
securing the bedbar bolt
Mower
Greensmaster 800
Greensmaster
1000
Greensmaster
1000
Greensmaster
1000
Greensmaster
1000
Greensmaster
1000
Greensmaster
1000
Greensmaster
1600
Greensmaster
1600
Mower
Greensmaster 1000
& Greensmaster
1600
(Figure 55).
3. Bedbar
(Figure 55).
(Figure 56).
Diameter/Material
50.8 mm (2.0 inches)
Aluminum
50.8 mm (2.0 inches)
Aluminum
50.8 mm (2.0 inches)
Aluminum
50.8 mm (2.0 inches) Steel
50.8 mm (2.0 inches) Cast Iron
63.5 mm (2.5 inches)
Aluminum
63.5 mm (2.5 inches)
Aluminum
63.5 mm (2.5 inches)
Aluminum
63.5 mm (2.5 inches) Steel
Greensmaster 1000: Decreases clip from 4.06 mm (0.16 inch)
to 6.35 mm (0.25 inch) for standard 11 blade reel.
Greensmaster 1600: Decreases clip from 5.84 mm (0.23 inch)
to 8.64 mm (0.34 inch) for standard 8 blade reel.
1. Jam nut
4. Remove each bedbar bolt allowing the bedbar to be
pulled downward and removed from the machine. Save
the 2 nylon and 2 stamped steel washers on each end
of the bedbar (Figure
Installing the Bedbar
1. Install the bedbar, positioning the mounting ears
between the washer and the bedbar adjuster.
2. Secure the bedbar to each side plate with the bedbar
bolts (jam nuts on the bolts) and 8 washers. Position a
37
Comments
Standard, 0.20 inch Spacing
Standard, 0.20 inch Spacing
More Penetration, 0.43 inch
Spacing
Least Penetration
More Penetration, 0.43 inch
Spacing
24 inches Wide for Edge
Support
Standard
Least Penetration
Comments
2
1
g014780
Figure 56
2. Bedbar bolt
56).