Safety; Safe Operating Practices - Toro 04054 Greensmaster 800 Operator's Manual

Safety

This machine meets or exceeds CEN standard EN 836:1997,
ISO standard 5395:1990, and ANSI B71.4-2004 specifications
in effect at the time of production when the Operator
Presence Kit, Part No. 112-9282 is installed.
Improper use or maintenance by the operator or owner can
result in injury. To reduce the potential for injury, comply
with these safety instructions and always pay attention to the
safety alert symbol, which means Caution, Warning, or
Danger—personal safety instruction. Failure to comply with
the instruction may result in personal injury or death.

Safe Operating Practices

The following instructions are adapted from the CEN
standard EN 836:1997, ISO standard 5395:1990, and ANSI
B71.4-2012.
Training
•
Read the Operator's Manual and other training material
carefully. Be familiar with the controls, safety signs, and
the proper use of the equipment.
•
If the operator or mechanic can not read the language
of the Operator's Manual it is the owner's responsibility to
explain this material to them.
•
Never allow children or people unfamiliar with these
instructions to use or service the mower. Local
regulations may restrict the age of the operator.
•
Never mow while people, especially children, or pets are
nearby.
•
Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
•
The owner/user can prevent and is responsible for
accidents or injuries occurring to himself or herself, other
people, or property.
•
All operators or mechanics must be trained. It is the
owner's responsibility for training users.
Preparation
•
While mowing, always wear substantial footwear, long
trousers, hard hat, safety glasses, and hearing protection.
Long hair, loose clothing, or jewelry may get tangled
in moving parts. Do not operate the equipment when
barefoot or wearing open sandals.
•
Thoroughly inspect the area where the equipment is to
be used and remove all objects which may be thrown by
the machine.
•
Warning—Fuel is highly flammable. Take the following
precautions:
– Store fuel in containers specifically designed for this
purpose.
– Refuel outdoors only and do not smoke while
refuelling.
– Add fuel before starting the engine. Never remove
the cap of the fuel tank or add fuel while the engine is
running or when the engine is hot.
– If fuel is spilled, do not attempt to start the engine
but move the machine away from the area of spillage
and avoid creating any source of ignition until fuel
vapors have dissipated.
– Secure all fuel tanks and container caps.
•
Replace faulty silencers.
•
Evaluate the terrain to determine what accessories and
attachments are needed to properly and safely perform
the job. Only use accessories and attachments approved
by the manufacturer.
•
Check that operator's presence controls, safety switches
and shields are attached and functioning properly. Do not
operate unless they are functioning properly.
Operation
•
Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
•
Mow only in daylight or in good artificial light.
•
Before attempting to start the engine, disengage all blade
attachment clutches, shift into neutral, and engage the
parking brake.
•
Stay alert for holes in the terrain and other hidden hazards.
•
Watch out for traffic when crossing or near roadways.
•
Stop the blades rotating before crossing surfaces other
than grass.
•
When using any attachments, never direct discharge of
material toward bystanders nor allow anyone near the
machine while in operation.
•
Never operate the machine with damaged guards, shields,
or without safety protective devices in place. Be sure all
interlocks are attached, adjusted properly, and functioning
properly.
•
Do not change the engine governor settings or overspeed
the engine. Operating the engine at excessive speed may
increase the hazard of personal injury.
4