Motorola AP-7562 Installation Manual page 39

Installation Guide
• Static IP / Mask - Specify an IP address for the WAN connection if using static address assignment
for the WAN port. An IP address uses a series of four numbers defined in dot notation, for example,
190.188.12.1. Additionally, specify a Mask for the access point's WAN connection. This number is
available from the ISP for a DSL or cable-modem connection, or from an administrator if the Access
Point connects to a larger network.
• Primary/Secondary DNS/Default Gateway - If using a static IP or DHCP, enter the Primary and
Secondary DNS server resource's numerical IP address and Default Gateway.
NOTE
12. Select Apply to implement the updates.
13. Expand the Configuration menu item and select Access Points. Each AP Name displays as a link that
can be selected to update the configuration of that specific Access Point. Select a target AP Name link
from amongst those displayed in the Access Points screen.
Refer to the LAN IP Interface Settings field, and add a VLAN and Static IP as required for enabling DHCP
(within the Configuration > Services screen) for client IP address requests and ensuring routable traffic.
If segmenting traffic between the Access Point's WAN and LAN, you'll
need to create a VLAN. Complete steps 13 and 14 to define the required
VLAN. Otherwise, proceed to step 15.
39