Motorola AP-7562 Installation Manual page 21

Installation Guide
VMM Power Options
A mounted AP-7562 operating as a VMM within a vehicle or mobile asset requires a power source delivered via
Power over Ethernet (PoE). A professional certified installation partner should be consulted in respect to
appropriate power sources and installation within a vehicle or mobile asset. A vehicular power source is not
provided. No responsibility is taken for any power source design operated outside of the allowed specifications for
power of an AP 7161 running as an AP 7161 VMM.
The following table shows a number of potential power sources and corresponding industry options to power an
AP-7562 VMM:
WARNING!
Potential Vehicular/Mobile Power
Sources
12V battery
24V battery
12V power plug
AC inverter within vehicle
PoE switch in train or vehicle
Exceeding these listed power requirements can invalidate warranty.
DC-DC convertor or DC PoE injector
DC-DC convertor or DC PoE injector
DC PoE injector with power plug adapter
AC PoE injector
Direct connection via CAT5E cable
Required Source
21