Omron Smart Process Control CJ-Series Brochure & Specs page 2

Introducing the New Style of Loop Control
Advanced controller functions integrated with the same CJ-series
functionality and high-speed capabilities
Function block programming for
easy engineering
Seamless integration of sequence
control and loop control.
HMI windows can be simply
generated from function blocks
automatically.
Integrated Loop Control and Sequence Control
An engine for controlling analog quantities (e.g., temperature, pressure, flowrate) is built into the CPU Unit together
with the engine for executing sequence control, delivering high-speed sequence control and high-speed, advanced
analog quantity control in a single Unit.
Sequence Control Engine
CPU Unit element:
CJ1G-CPU4 H
CX-Programmer sequence control program
(ladder, function block, structured text)
90 mm
Execute 20-Kstep ladder
20-Kstep
programs in 1 ms 1 ms
(See note.)
Note: Basic instructions only
2
Ultra-small size fits in most
devices
Backplane-free structure provides
the functions you need in
minimum space.
Low-cost solution for controlling
multiple loops
Control functions have the added
ability to control multiple loops.
Consolidating the proven CS-
series loop-control technology
Effective maintenance functions
Loop Control Engine
69 mm
Loop Controller Element:
Up to 300 or 50 function blocks
CX-Process loop control program (function blocks)
Execute PID Control for
20 Loops 10 ms
20 Loops in 10 ms
D: 65 mm (See note.)
Loop-control
Note: General application (e.g., loop
configuration: Ai4 Terminal + Segment
Linearizer + Basic PID + Ao4 Terminal)
CPU Unit
Super compact: Only 90 mm High and 65 mm Deep, and
Backplane-free structure enables flexible width design.
Compact PLC Aids Machine Downsizing by Fitting Just About Anywhere.
Wide Array of I/O Units, Special I/O Units, and CPU Bus Units Are Available to Suit Your Application.
Greatly
reduces space
between ducts
High-speed sequence control functions can be used directly for
high-speed, advanced loop control.
Sequence control: Executes 20-Kstep ladder programs in 1 ms (with basic instructions only).
PCMIX = 7.4 LD or OUT executed in 40 ns
Loop control: Executes PID operations for 20 loops in up to 10 ms. This is a guide for general
applications.
(See note.)
Sequencing
PCMIX Values
CJ1G 7.4
SYSMAC 1.4
Dedicated microcomputer board SYSMAC CJ-series PLC
The same level of high-speed processing
High-speed processing
Only One CPU Unit Needed
(Example: 1-ms response)
Duct
90 mm high
Power supply SSR Contactor
S82K G3J J7AN
Duct
Note: Loop configuration: Ai4 Terminal + Segment Linearizer + Basic PID + Ao4 Terminal
The external I/O response time in the overall system refers to the conversion time.
Digital Controller
High-speed processing
(Example: 50 ms)
3