Enter Setup
Code 11
Restore Factory Defaults
Enable/Disable Code 11
Enable Code 11
Set Length Range for Code 11
The engine can be configured to only decode Code 11 barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
For more information, see the "j. Program the Length Range (Maximum/Mininum Lengths) for a Symbology" section
in Appendix.
Set the Minimum Length (Default: 4)
Exit Setup
**
Restore the Factory Defaults of
Code 11
** Disable Code 11
Set the Maximum Length (Default: 48)
82