Table of Contents
Advertisement
Introduction
The EM2037 series embedded 2D barcode scan engines are armed with CMOS image capturer and the Newland patented
, a computerized image recognition system, featuring fast scanning and accurate decoding on barcodes on virtually
any medium - paper, magnetic card, mobile phones and LCD displays. The EM2037s can be easily integrated into OEM
equipments or systems, such as hand-held, portable, or stationary barcode scanners.
Moreover, the EM2037s open image acquisition interface, data interface and I/O interface to OEM developers to allow their
special integration needs. EM2037 Software Development Kit is provided for easy and quick development of OEM
applications.
About This Guide
This guide provides programming instructions for the EM2037. Users can configure the EM2037 by scanning the
programming barcodes included in this manual.
The EM2037 has been properly configured for most applications and can be put into use without further configuration. Users
may check the Factory Defaults Table in Appendix for reference. Throughout the manual, programming barcodes marked
with asterisks (**) are factory default values.
Document Set
EM2037 related documents include:
NLS-EM2037 Series Embedded 2D Barcode Scan Engine
Integration Manual:
NLS-EM2037 Series Embedded 2D Barcode Scan Engine
User Guide:
Sample Barcodes:
Connecting EVK to PC
The supplied EM2037 EVK tool can assist users in application development for the EM2037. You can connect EM2037 EVK
to PC via a USB connection or an RS-232 connection. In case of USB connection, a driver is required if EVK wants to
communicate with EM2037 and receive decoded data through virtual serial port.
1
Chapter 1 Getting Started
Describes how to integrate the EM2037.
Describes how to use and program the EM2037.
Provides sample barcodes for testing the EM2037.
Enter Setup
**Exit Setup
Advertisement
Table of Contents
