Initial Start-Up - Groen OM-TDB/7 Operator's Manual

BE SURE ALL OPERATORS
INSTRUCTIONS, CAUTIONS, AND SAFETY INSTRUCTIONS CONTAINED IN THIS MANUAL.
Now that the kettle has been installed, you should
test it to ensure that the unit is operating correctly.
1. Remove all literature and packing materials
from inside and outside of the unit.
2. Turn on the electrical service to the unit.
3. Pour 1-2 quarts of water into the kettle.
4. Following "To Start Kettle" instructions in the
"Operation" section of this manual, begin
heating the water at the highest thermostat
setting. The heating indicator light should
come on immediately, and heating should
continue until the water boils.
5. To shut down the unit, turn the thermostat
dial to "OFF".
A simple turn of the thermostat controls the Groen TBD/7 Kettle

Initial Start-Up

IMPORTANT:
READ, UNDERST AND
If the unit functions as described above, it is ready
for use. If the unit does not function as intended,
contact your local Groen Certified Service Agency.
9
AND FOLLOW T HE
WARNING
AVOID ALL DIRECT CONTACT WITH HOT
SURFACES. DIRECT
COULD RESULT IN SEVERE BURNS.
AVOID ALL DIRECT CONTACT WITH HOT
FOOD OR WAT ER
DIRECT CONTACT COULD RESULT
SEVERE BURNS.
OM-TDB/7
OPERAT ING
SKIN CONT ACT
IN THE KETTLE.
IN