Installing The Platter - Gold Note VALORE Plus 425 Owner's Manual

Installing the platter

For the assembling the Turntable Platter you need these parts:
STEP 1
Lay down the Platter of the turntable as
shown in the picture taking care it
perfectly fits the
spindle flat surface.
STEP 2
Thread the Platter Spindle Tip as show in the picture
STEP 3
The conical shape of the Platter Spindle Tip once firmly threaded
perfectly clamps the Turntable platter
OWNER'S MANUAL
20mm thick Platter made of Acrylic
Platter Spindle Tip that clamps the platter (1x)
page 7