Gold Note VALORE Plus 425 Owner's Manual page 4

INTRODUCTION
GOLD NOTE® manufactures a wide range of presti-
gious and sophisticated audio products featuring unique
and
innovative technical and aesthetic characteristics.
The Valore Plus 425 is the definitive evolution of the
Valore (400mm) produced by Gold Note since the
2010, the entry level Gold Note High-End Audio
turntable merges audio performance, with high grade of
finish and elegant look.
The Valore Plus 425 features a 30mm thick plinth
wisely shaped and cut around the bearing of the platter
and the motor to drastically reduce all unwanted vibra-
tions.
The Valore Plus 425 platter is made of 20mm acryl-
ic. The design of the platter comes directly from the top
level Gold Note turntables as well as the 60mm long
platter bearing and spindle, finely machined to achieve
the best audio quality of its category.
The Valore Plus 425 platter is designed to stay only
3mm closed to the turntable plinth. Such small
platter/plinth interference allows reducing turbulence
featuring a great noiseless rotational stability.
The Valore Plus 425 features a 12Volt synchronous
motor developed by Gold Note about a Pulse Width
Modulator design transforms the power voltage in
AC-DC-AC mode, enabling the best coupling of the two
AC semi-waves for a perfect coupling literally annulling
any motor resistance and vibration allowing the highest
motor torque at the same time. The Power Supply of the
motor electronically control the 33⅓ and 45rpm and
the fine speed adjust keeping the selection permanently
in the turntable memory even without AC power.
All Gold Note products are proudly designed, manufactured and assembled in Italy 100%
OWNER'S MANUAL
Besides the new perfectly polished hourglass shaped
motor pulley also allows the turntable belt spins very
smoothly reducing the wow& flutter and noise as never
before.
The Valore Plus 425 is 25mm wider than the original
entry level Valore that allows equipping more flexibly 9"
tone arms.
The Valore Plus 425 is offered as package with a
Gold Note dedicated 9" arm and the Dust Cover.
The Valore Plus 425 though is undoubtedly an
extraordinary good turntable to be used in a large
variety of prestigious High-End Audio systems it is an
extremely reliable, easy to use turntable for all audio
enthusiast look for performance, cosmetic but efficiency
at the same time.
The plinth of the Valore Plus 425 is available in black
or white lacquer, or on demand covered with real Italian
leather. As special edition the Valore Plus 425 is avail-
able with 30mm thick transparent acrylic plinth too,
that, finely handcrafted, together with a great look
enables higher dampening performance due to the
particularly absorbing quality of the material.
page 3