Samsung NV73J7740RS User & Installation Manual page 29

Vapour cooking
The oven is featured by the Vapour function. The Vapour cooking function allows you to use
of a wide range of recipes.
NOTE
• When Vapour is enabled and the water
drawer runs out of water, the
indicator blinks. The oven continues to
operate but the steam generator stops
operation until you refill the water
drawer with water.
NV73J7740RS_EU_DG68-00614E-01_EN.indd 29
1. Fill the water drawer with 500 ml of
water.
2. On the feature panel, press
3. Use the / buttons to select a
function. Then, press OK.
4. Use the / buttons to select a Vapour
level, and then press OK.
5. Set the cooking time and/or temperature
if necessary. For more information, see
Common Settings.
The oven starts preheating until the internal
temperature reaches the target temperature.
Preheating is recommended for all cooking
modes unless otherwise specified in the
cooking guide.
• Make sure to drain the remaining water
after using Vapour Cooking. Once the
oven starts draining, please wait until
the draining cycle is complete.
• When a Vapour function is complete, you
must empty the water drawer because
the remaining water can affect other
cooking modes.
.
English 29
2015-05-18 3:37:24