Printing Speed Is Slow - Canon MX530 series Online Manual

Hide thumbs Also See for MX530 series:

Table of Contents

Printing Speed Is Slow

The machine may be printing out a large job issued from another computer.

Make sure that the radio status is good and adjust the installation positions

while monitoring the radio status with IJ Network Tool.

Monitoring Wireless Network Status

Make sure that there is no barrier or obstacle between the access point and the machine. Wireless

communication between different rooms or floors is generally poor. The metal, concrete, or timber including the

metallic material, mud wall, or insulator may interrupt a wireless communication. If the machine cannot

communicate with the computer over a wireless LAN for the wall material, place the machine and the computer

in the same room or floor.

Make sure that there is no source of interference in your vicinity.

If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed nearby,

the device may cause interference. Place the wireless station as far away from the interference source as