Printing Speed Is Slow - Canon MX450 series Online Manual

Printing Speed Is Slow

• Check 1: The machine may be printing out or scanning a large job
issued from another computer.
• Check 2: Make sure that the radio status is good and adjust the
installation positions while monitoring the radio status with IJ Network
Tool.
Monitoring Wireless Network Status
Make sure that there is no barrier or obstacle between the access point and the machine. Wireless
communication between different rooms or floors is generally poor. The metal, concrete, or timber
including the metallic material, mud wall, or insulator may interrupt a wireless communication. If the
machine cannot communicate with the computer over a wireless LAN for the wall material, place the
machine and the computer in the same room or floor.
• Check 3: Make sure that there is no source of interference in your
vicinity.
Since a device such as a microwave oven uses the same frequency bandwidth, it may cause
interference. Place the wireless devices as far away from the source of interference as possible.