Canon MX530 series Online Manual page 490

Hide thumbs Also See for MX530 series:

Table of Contents

If you forward the data to the LAN-connected computer, select a name of the computer to forward the

scanned data.

• If you select Search again and press the OK button, the machine starts searching for the

connected computers again.

• When you forward the scanned data to the computer using WSD (one of the network protocols

supported in Windows 8, Windows 7, and Windows Vista), select Active for WSD scan from dev.

on WSD setting on Other settings in LAN settings under Device settings.

6. Make sure that Document type is selected, then press the OK button.

button to select the document type, then press the OK button.

• When you forward the scanned data to the computer searched using WSD, you cannot select the

document type.

• The * (asterisk) on the LCD indicates the current setting.

This item is available only when the machine is connected to the computer using a USB cable.

The machine detects the type of the originals automatically and the image is forwarded in the

optimized size, resolution and data format.

• You can select Auto scan only when you forward the scanned data to the USB-connected

• Load originals properly according to their type; otherwise, some originals may not be scanned

For details on how to load the original:

Loading Originals

• The following items can be scanned:

Photos, postcards, visiting cards, magazines, newspapers, documents, BD/DVD/CDs

• The following items cannot be scanned properly.

• A4 sized photos

• Documents smaller than 5 inches x 7 inches (127 mm x 178 mm) such as a paperback with its

backbone cut off

• Originals on thin white paper

• Long and narrow originals such as panoramic photographs

• When you scan originals from the ADF, it may take longer to scan the first page.

Scans the original on the platen glass or in the ADF applying the optimized settings for scanning a