Canon MX530 series Online Manual page 571

Hide thumbs Also See for MX530 series:

Table of Contents

◦ Paper has run out:

Load the paper and press the OK button.

◦ A different size of paper from that specified by Page size is loaded:

Load the same size of paper as that specified by Page size, then press the OK button.

◦ Page size is set to other than A4, Letter, LTR, or Legal:

Set Page size to A4, Letter, LTR, or Legal.

Changing the Paper Settings

• Some of page sizes are not available depending on the country or region of purchase.

◦ Media type is set to other than Plain paper:

Set Media type to Plain paper.

Changing the Paper Settings

• You pressed the Stop button to cancel printing of a fax:

Press the FAX button to resume printing of the fax.

• The machine can store up to max. 50 pages* (max. 20 documents) of faxes in the machine's memory.

* When using ITU-T No.1 chart (Standard mode)

• If the machine's memory becomes full during memory reception, only pages which already have been

received are stored in the memory. Print the received faxes stored in the machine's memory or save

them on the USB flash drive, delete them from the machine's memory, and have the sender resend the

Document Stored in Machine's Memory