Canon MX530 series Online Manual page 232

Hide thumbs Also See for MX530 series:

Table of Contents

6. TCP/IP Setting:

Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your

network environment.

Get IP address automatically

Select this option to use an IP address automatically assigned by a DHCP server. DHCP

server functionality must be enabled on your wireless LAN router or access point.

Use following IP address

If no DHCP server functionality is available in your setup where you use the printer or you

want to use a particular IP address, select this option to use a fixed IP address.

• Access Points Screen

1. Detected Access Points:

The signal strength from the access point, encryption type, name of access point, and the radio

channel can be confirmed.

• If you connect to a network that is not protected with security measures, there is a risk of

disclosing data such as your personal information to a third party.

• Signal strength is displayed as follows.

• Type of encryption is displayed as follows.

Blank: No encryption

WEP: WEP is set

WPA: WPA is set

WPA2: WPA2 is set