The Message Is Displayed On The Computer Screen During Setup - Canon MX530 series Online Manual

Hide thumbs Also See for MX530 series:

Table of Contents

The Message Is Displayed on the Computer Screen During Setup

The Enter Password Screen Is Displayed During Setup

The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the Access Points

"You are connecting the machine to the non encrypted wireless network" Is Displayed

The Enter Password Screen Is Displayed During Setup

The following screen is displayed if an administrator password is set to the machine which has already

been set up.

Enter the administrator password you have set.

Changing the Settings in the Admin Password Sheet

The Screen for Setting the Encryption Is Displayed After Selecting the

Access Point in the Access Points Screen

This screen is displayed automatically if the selected access point is encrypted. In this case, configure the

details to use the same encryption settings set to the access point.

For information on the encryption settings, see

"You are connecting the machine to the non encrypted wireless network" Is

Security is not configured on the access point. The machine can still be used, so continue the setup

procedure to complete it.

• If you connect to a network that is not protected with security measures, there is a risk of disclosing

data such as your personal information to a third party.

Changing the Settings in the Wireless LAN