Canon MX530 series Online Manual page 192

Align heads manually
Usually, the Print Head Alignment function of Test Print on the pop-up menu in the Canon IJ
Printer Utility is set to automatic head alignment, but you can change it to manual head alignment.
If the printing results are unsatisfactory even after you execute automatic head alignment,
manual head alignment.
Check this check box to perform the manual head alignment. Uncheck this check box to perform the
automatic head alignment.
Detect the paper width when printing from computer
When you print from the computer, this function identifies the paper that was loaded into this
machine.
When the paper width detected by the machine differs from the width of the paper specified in
Paper Size on the Print dialog, a message is displayed.
To use paper width detection when printing from the computer, select the check box.
Important
• When you use a custom page size, correctly set the size of the paper loaded in the machine in
the Custom Paper Sizes dialog.
If an error message is displayed even though paper of the same size that was specified is
loaded, uncheck the Detect the paper width when printing from computer check box.
3. Apply the settings
Click Apply and when the confirmation message appears, click OK.
The machine operates with the modified settings hereafter.
192
execute