Download Print this page

Canon PIXMA MX512 Installation Manual

Installing your multifunction to your network for the first time.
Hide thumbs

Advertisement

Next >>
<< Previous
Installing Your Multifunction
to Your Network for the First Time
PIXMA MX512
Macintosh OS
1

Advertisement

   Also See for Canon PIXMA MX512

   Summary of Contents for Canon PIXMA MX512

  • Page 1

    Next >> << Previous Installing Your Multifunction to Your Network for the First Time PIXMA MX512 Macintosh OS...

  • Page 2

    << Previous Next >> Installing Your Multifunction to Your Network for the First Time PIXMA MX512 Mac OS Preparing to Connect My Multifunction to My Network Network Requirements Notes on Wireless Connection Installing the Drivers...

  • Page 3

    Preparing to Connect My Multifunction << Previous Next >> To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network.

  • Page 4

    Preparing to Connect My Multifunction << Previous Next >> To My Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment.

  • Page 5: Software Installation

    Setup CD-ROM during restarting. The installation resumes once your computer has restarted. • If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software to always allow access.

  • Page 6: Installing The Drivers

    << Previous Next >> Installing the PIXMA MX512 on Your Wireless Network If you are installing your printer on your network for the first time, a step-by-step walk through of the wireless setup is built in to the installation routine of the software that shipped with your PIXMA.

  • Page 7

    Installing the Drivers << Previous Next >> 1. Insert the CD-ROM into the computer. IMPORTANT If the USB cable is already connected, unplug it. If a message appears on the computer, click Cancel. 2. Double-click the [Setup] icon in the CD-ROM folder, then click [Download] in the subsequent window.

  • Page 8

    Installing the Drivers << Previous Next >> REFERENCE •When the CD-ROM folder does not open automatically, double-click the CD-ROM icon displayed on the desktop. •The screen below is displayed while downloading.

  • Page 9

    Installing the Drivers << Previous Next >> If you click [Cancel] while downloading, you will see the following screen. - If you click [No], you will return to the screen displayed while downloading. - If you click [Yes], the download is cancelled. In this case, the files under the download are deleted. When the download fails, the screen below is displayed.

  • Page 10

    Installing the Drivers << Previous Next >> 3. When the download is complete, the screen below is displayed. Click [Next]. REFERENCE Select "Save a file for setting up the software again to the download folder after the installation is complete," and the file will be saved to the download folder.

  • Page 11

    Installing the Drivers << Previous Next >> You can perform the setup later using this file. 4. In the subsequent screen, enter the administrator name and password. Then click [OK].

  • Page 12

    Installing the Drivers << Previous Next >> 5. Click Next 7. Click Wireless Connection. Follow any instructions and go to step 8 6. Click Network Connection. 8. Click Other Methods...

  • Page 13

    Installing the Drivers << Previous Next >> 9. Click Standard setup. 10. Continue to follow any instructions until the screen below is displayed. Network connection setting is complete. Follow any instructions and go to step 10. Click Next...

  • Page 14

    2. Click Add Printer. REFERENCE Follow any on-screen instructions to proceed with The alphanumeric characters after Canon xxx series is the software installation. the machine's Bonjour service name or MAC address. If the machine is not detected, make sure of the following.

  • Page 15

    3. Select Canon xxx series Canon IJ Network and click Add. CAUTION If you will be installing the Canon printer driver on Mac OS X and using the printer through a network connection, you can select [Bonjour] or [Canon IJ Network] in the [Add Printer] dialog.

  • Page 16

    Installing the Drivers << Previous Next >> 4. Click Next. 5. Click Next. Setup is complete...

  • Page 17

    Installing the Drivers << Previous Installing the PIXMA MX512 on Your Wireless Network If you can’t find your CD-ROM, you may download the MX510 series Mini Master Setup, which includes the same step-by-step installation as the CD-ROM, by following the instructions below: Click here to access the MX512 Drivers &...

Comments to this Manuals

Symbols: 0
Latest comments: