Canon MX530 series Online Manual page 181

Hide thumbs Also See for MX530 series:

Table of Contents

LCD and Operation Panel

The paper cleans the inside of the machine as it feeds through the machine.

Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning

• When performing Bottom Plate Cleaning again, be sure to use a new piece of paper.

If the problem is not resolved after performing cleaning again, the protrusions inside the machine may be

stained. Wipe off any ink from the protrusions using a cotton swab or the like.

• Be sure to turn off the power and unplug the power cord before cleaning the machine.

• The power cannot be turned off while the machine is sending or receiving a fax, or when unsent

faxes are stored in the machine's memory. Make sure if the machine completed sending or

receiving all the faxes before unplugging the power cord.

• The machine cannot send or receive faxes when the power is turned off.

• If the power cord is unplugged, the date/time settings will be reset and all documents stored in the

machine's memory will be lost. Send or print a necessary document, or save it on a USB flash drive

before unplugging the power cord.

button to select Bottom cleaning, then press the OK button.