Machine Installation; Connecting Power Supply - SignaMax 065-1530 Install Manual

Console port cable
Ethernet cable (065-1530 Signamax Security Router Ethernet cable is
configured according to the number of Ethernet modules)
Modular interface cable
Needed equipment:
Ethernet 10 BASE-T HUB
Configuring terminal (can be PC)
Equipment relevant to optional module

Machine Installation

The dimensions of 065-1530 Signamax Security Router are 340mm
x 230mm x 44mm (W×D×H). Following is the installation process:
Step 1: Fix angle iron on the front panel or back panel sides with bolts
Step 2: Place router on empty slot
Step 3: Fix the angle iron to slots with bolts
Step 4: Fix the bracket and fixed angle iron over the rack

Connecting Power Supply

065-1530 Signamax Security Router adopts stable power supply
switch system, and it has lower requirement of AC.
AC power supply input: 100
DC power supply input: -40
Maximum power: 15W ± 10%
Use the below shown power supply jack or MIM PC power supply
jack, and ensure reliable grounding.
Power supply jack:
2 40V, 50
～
-57V
～
26 SIGNAMAX LLC • www.signamax.eu
6 0Hz
～