Grounding Connection; Main Control Board Cable Connection; Console Port Connection - SignaMax 065-1530 Install Manual

Ground wire
Naught wire
Connecting power supply:
Step 1: Switch off the power supply switch. Connect one side of
supply cable to the entry of back panel of router, and another side to
power supply jack (AC: 220V 50Hz/60Hz. DC: -48V).
Step 2: Switch on the power supply.
Step 3: Check whether the power supply indicator front panel is on. If it
is not on, repeat step 1 and 2.

Grounding Connection

The grounding requirement of equipment with plastic chassis and
without grounding post:
Grounding mode should be in accordance with the united grounding
requirement of working place, protection place and anti-thunder
grounding.
Grounding cable section area: The grounding cable (section area is
according to maximum current load) should adopt (copper) lead, but
not naked lead. The united grounding resistance should be
Good power supply grounding

Main Control Board Cable Connection

The section explains the method of connecting 065-1530 Signamax
Security Router control board cable to network including connecting
router console port.

Console Port Connection

The 065-1530 Signamax Security Router provides one EIA/TIA-232
async serial console port. Via this port, the user configures the
router by adopting RS-232 serial character terminal (normally it is a
PC).
Live wire
27 SIGNAMAX LLC • www.signamax.eu
power
5 .
＜