Advertisement
Quick Links
Advertisement
Related Manuals for SignaMax 065-7532PoE
Summary of Contents for SignaMax 065-7532PoE
- Page 1 16 Port Nway Fast Ethernet PoE Web Smart Switch 065-7532PoE Model User‘s Guide...
- Page 2 CE Warning This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. SIGNAMAX LLC • www.signamax.eu...
- Page 3 The rack-mount size was specifically designed for medium to large workgroups. 065-7532PoE switch can be installed where space is limited; moreover it provides smooth network migration and easy upgrade to network capacity. The 19” size can be rack-mount on 19”...
-
Page 4: Package Contents
Package Contents Before you start to install this switch, please verify your package that contains the following items: One 065-7532PoE PoE Switch One Power Cord One CD with User’s Manual 16 Port Switch Note: If any of these items is found missing or damaged, please contact your local supplier for replacement. - Page 5 LED Indicators of 16 Port PoE 10/100/1000M Switch Status Description Power Power is on. Power is off. LINK/ACT Port is for connection. No connection. Flashing Data is transmitting or receiving Port is linked to Power Device No Power Device is connected SIGNAMAX LLC • www.signamax.eu...
- Page 6 PC/Other devices to 065-7532PoE PoE Fast Ethernet Switch Via a twisted pair cable straight through, 065-7532PoE switch can be connected to PCs, servers and other network devices. Power Device to 065-7532 PoE Fast Ethernet Switch and...
- Page 7 Buffer Memory: 1.625 Mb Method: Store and Forward Filtering/ 100Mbps port – 148,800pps Forwarding Rates 10Mbps – 14,880pps 10BaseT Cat. 3, 4, 5 Transmission Media UTP/STP 100BaseTX Cat. 5 UTP/STP LED Indicators Per Port: LINK/ACT, PoE SIGNAMAX LLC • www.signamax.eu...
- Page 8 440 × 220 × 44 mm Dimensions (L x W x H) Weight 3.8 kg Operating 0 to 55℃ Temperature Storage -20 to 90℃ Temperature 10 to 90% RH Humidity (non-condensing) Certifications FCC Class A, CE SIGNAMAX LLC • www.signamax.eu...
- Page 9 Web Smart Switch Configure Please follow the steps to configure this Web Smart switch. Step 1: Use a twisted pair cable to connect this switch to your PC. Step 2: Set your PC’s IP to 192.168.2.xx. SIGNAMAX LLC • www.signamax.eu...
- Page 10 Open the web browser (like IE…), and go to 192.168.2.1 site, and then you will see the login screen. Key in the ID and the password to pass the authentication, ID: admin Password: admin After the authentication procedure, the home page shows up. SIGNAMAX LLC • www.signamax.eu...
- Page 11 On the following home page, select the configuration by clicking the icon. It includes, - Administrator - Port Management - VLAN Setting - Per Port Counter - Trunk Setting - QoS Setting - Security Filter - Configuration Backup/Recovery - Miscellaneous - Logout SIGNAMAX LLC • www.signamax.eu...
- Page 12 You can change the user name and the password, and click “Update” to confirm the new change. After that, you can reset the switch by power off and then power on to take the new user name and the password effectively. SIGNAMAX LLC • www.signamax.eu...
- Page 13 DHCP IP configuration and click “Update” to confirm the new change, and then the message will show “Setting Process OK!!”, After that, you should reset this switch by power off and then power on it to complete the new change. SIGNAMAX LLC • www.signamax.eu...
- Page 14 Administrator: System Status It shows this switch MAC address and system version. You can change the new comment of this switch by typing the new comment and click “Update” to confirm the new change. SIGNAMAX LLC • www.signamax.eu...
- Page 15 Administrator: Load Default Setting You can click “Load” to load the factory default setting, and then reset the switch by power off and then power on to take it effectively. SIGNAMAX LLC • www.signamax.eu...
- Page 16 Administrator: Firmware Update Follow the instruction on the screen to update the new firmware. Please contact with your sales agents to get the latest firmware information. SIGNAMAX LLC • www.signamax.eu...
- Page 17 Administrator: Reboot Device You can click “Confirm” to reboot the device. SIGNAMAX LLC • www.signamax.eu...
- Page 18 “Pause” - you can enable/disable the port. “Backpressure” – you can enable/disable the backpressure of the port. “Tx Capability” – you can enable/disable TX capability of the port. “Addr. Learning” – you can enable/disable this function of the port. SIGNAMAX LLC • www.signamax.eu...
- Page 19 Port Mirroring is used to mirror traffic, RX, TX or TX&RX, from Source port to Destination port for analysis. Select the Destination port from port 1 to port 16, and then select the Source port by clicking the checking box of the port. SIGNAMAX LLC • www.signamax.eu...
- Page 20 1~255 based on two speed levels. “RX Rate” is meant you can set the different receiving rate of this selected port and choose the speed from 1~255 based on two speed levels. SIGNAMAX LLC • www.signamax.eu...
- Page 21 Port Management: Broadcast Storm Control You can set the threshold of per port to define the status of broadcast packets by clicking “Update”. SIGNAMAX LLC • www.signamax.eu...
- Page 22 VLAN Setting: VLAN Mode There are two VLAN modes, Port Based VLAN and Tagged VLAN, by clicking “Change VLAN mode” to select the mode you want. SIGNAMAX LLC • www.signamax.eu...
- Page 23 VLAN Setting: VLAN Member Setting (Port Based) You can select a group, and then click the port number which you want to put it into the selected VLAN group. SIGNAMAX LLC • www.signamax.eu...
- Page 24 VLAN Setting: Multi to 2 Setting This is a special design for easily setting the switch VLAN into “VLAN Per Port“. After this setting, all ports can only connect to the destination port. SIGNAMAX LLC • www.signamax.eu...
- Page 25 Per Port Counter: Counter Category You can read the transmitting and receiving packet of the connecting port. SIGNAMAX LLC • www.signamax.eu...
- Page 26 “DA” – you can select Destination Address of the port you want to include into the same group. “SA & DA” – you can select both Source Address and Destination Address of the port you want to include into the same group. SIGNAMAX LLC • www.signamax.eu...
- Page 27 “All-High-before-Low” – packets set in high priority mode will be firstly transmitted completely before packets set in low priority mode. “Weight-Round-Robin” – WRR, you can set the ratio of the transmitting packet for the low priority to high priority. SIGNAMAX LLC • www.signamax.eu...
- Page 28 “VLAN Tag” – you can select the port which you want to configure as packets with special Tag will be firstly transmitted. “IP/DS” – you can select the port which you want to configure as packet with special IP will be firstly transmitted. SIGNAMAX LLC • www.signamax.eu...
- Page 29 QoS Setting: TCP/UDP Port Based There are four modes of TCP/UDP priority to select as below, “F-I-F-O”- First-in-First-Out, the first receiving packet will be firstly SIGNAMAX LLC • www.signamax.eu...
- Page 30 MAC address to activate on the selected port. When this function is enabled, the port will record the first receiving source MAC address as the security MAC address and only allow the packet which has this MAC address to activate on the port. SIGNAMAX LLC • www.signamax.eu...
- Page 31 You can enable or disable this function of per port. If you enable this function, there are two modes as below, “Negative Filter Mode” – packets compliant with protocol will be dropped. “Positive Filter Mode” - packets compliant with protocol will be forwarded. SIGNAMAX LLC • www.signamax.eu...
- Page 32 Configuration Backup/Recovery Follow the instruction on the screen to update the original setting. SIGNAMAX LLC • www.signamax.eu...
- Page 33 “Aging Time” - You can set queue aging time into different milliseconds or disable this function. “VLAN Striding” – You can enable/disable this function. “IGMP Snooping” – You can enable/disable this function. Logout: You can click “Logout” to logout. SIGNAMAX LLC • www.signamax.eu...