Greasing The Steering Head Bearing; Removing The Front Fender; Installing The Front Fender - KTM 250 EXC-F Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.16

Greasing the steering head bearing

12.17

Removing the front fender

12.18

Installing the front fender

(XCF‑W)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
(All EXC‑F models)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
800010-10
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
K00072-10
–
Remove screws
K00073-10
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
K00072-10
–
Mount and tighten screws
Guideline
Remaining screws, chassis
K00073-10
Finishing work
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
( p. 54)
( p. 57)
( p. 53)
( p. 54)

.

. Remove the front fender.

.
p. 97)
p. 95)

.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 96)
61