12
SERVICE WORK ON THE CHASSIS
12.41
Checking the swingarm
12.42
Checking throttle cable routing
12.43
Checking the rubber grip
–
Check the swingarm for damage, cracking, and deformation.
»
If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401341-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Main work
–
Check throttle cable routing.
Both throttle cables must be routed to the throttle valve body side by side behind
the handlebars and above the fuel tank bearing.
»
If the throttle cable routing is not as specified:
–
Correct throttle cable routing.
M00995-01
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
–
Check the rubber grips on the handlebar for damage and wear and to ensure they
are firmly seated.
»
If a rubber grip is damaged, worn or loose:
–
Change and secure the rubber grip.
Grip adhesive (00062030051) (
401197-01
Info
Always change a damaged swingarm. Repair of the swingarm is not
authorized by KTM.
p. 62)
(
p. 68)
(
p. 69)
p. 62)
p. 126)
75