Controls; Clutch Lever; Hand Brake Lever; Throttle Grip - KTM 250 EXC-F Owner's Manual

6

CONTROLS

6.1

Clutch lever

6.2

Hand brake lever

6.3

Throttle grip

6.4 Kill switch (All EXC‑F models)
6.5 Kill switch (XCF‑W)
The clutch lever
The clutch is hydraulically operated and self-adjusting.
M00083-10
The hand brake lever
The hand brake lever is used to activate the front brake.
M00084-10
The throttle grip
M00085-10
Kill switch 
Possible states
• Kill switch
the engine can be started.
• Kill switch
ning engine stops, and a non-running engine will not start.
102044-10

Kill switch
Possible states
• Kill switch
the engine can be started.
• Kill switch
goes out if it was running, or does not start if it was off.
102046-10

is fitted on the left side of the handlebar.
 is fitted on the right side of the handlebar.

is fitted on the right side of the handlebar.
is fitted on the left side of the handlebar.
in basic position – In this position, the ignition circuit is closed and
is pressed – In this position, the ignition circuit is interrupted, a run-
is fitted on the left side of the handlebar.
in basic position – the ignition circuit is closed in this position and
pressed – the ignition circuit is open in this position, the engine
14